Skip to content
Tailapps

Examples

Small apps for real jobs.

Control your Mac from your phone. Watch a sensor, a printer or a home server from anywhere. Each of these is one micro-app your agent can write, running on your Mac and shown as a card on your iPhone.

Mac controls, from your iPhone

Your Mac’s sound, speakers and screen, in your pocket.

TailApps gives apps your Mac’s own controls: volume, mute, speakers and AirPods, Wi-Fi, Bluetooth, battery and the display. Put them on a card on your iPhone and your Mac does what you tap. Try it.

Finder 11:30
System Controls this Mac
40%

OutputMacBook Speakers

Battery82% · charging

Wi-FiHome

Your Mac

Mac Remote

Mark’s MacBook

40%
Battery 82% Wi-Fi Home

Your iPhone

On your iPhone: a slider that sends to the Mac

"sources": { "mac": { "inbox": "mac" } }

{ "field": "Volume", "type": "slider", "value": "$mac.volume",
  "min": 0, "max": 100, "on_change": "volume" }

"volume": { "steps": [
  { "send": { "volume": { "value": "$args.value" } } }
]}

On your Mac: the same app sets the real volume and reports back

"sources": {
  "sound":  { "system": "audio", "on_change": { "action": "report" } },
  "volume": { "inbox": "volume", "on_receive": "set_volume" }
},
"actions": {
  "set_volume": { "steps": [
    { "audio.volume.set": "$args.event.value" }
  ]},
  "report": { "steps": [
    { "send": { "mac": { "volume": "$sound.volume" } } }
  ]}
}

Each change is a message between your own devices, sealed end to end. The Mac asks you once to approve sound and display control.

Use cases

Sensors, servers and side projects, on your phone.

Anything that can make a web request, run a command or answer one can show up as a micro-app on your Mac and a card on your iPhone, with an alert when it matters.

Home & IoT

Greenhouse sensor

An ESP32 posts temperature, humidity and soil moisture every five minutes. Dry soil sends an alert to your phone.

Push URL from an ESP32

http.addHeader("X-TailApps-Alert", "Basil needs water");
http.POST("{\"temp\":22.4,\"soil\":31}");

Home & IoT

Front door

Home Assistant posts when the door opens or closes. Set the URL to deliver to all your devices and your lock screen says so, even with your Mac asleep.

Push URL from Home Assistant

rest_command:
  door:
    url: !secret tailapps_door
    method: post
    content_type: application/json
    headers: { X-TailApps-Alert: "Front door opened" }
    payload: '{"door":"open"}'

Home & IoT

3D printer

Your printer’s webhook posts progress. Watch the job from the sofa and get an alert when it’s done.

Push URL from a webhook

curl $PUSH_URL -H 'X-TailApps-Alert: Print finished' \
  -d '{"job":"bracket.gcode","progress":100}'

Home & IoT

Solar on your Wi-Fi

The iPhone and the Mac read the inverter’s local API straight over your Wi-Fi. No cloud, no account.

Fetch, on your network

"solar": { "fetch": "http://192.168.1.40/api/now",
           "every": 30 }

Servers

Raspberry Pi health

A cron job on the Pi sends CPU temperature, disk and uptime every minute, sealed end to end.

The CLI on Linux

* * * * * /usr/local/bin/tailapps send pi/health \
  "$(/home/pi/health.sh)"

Servers

Backups

Your backup script reports when it finishes, and how big the snapshot was. Silence means look.

The CLI from a script

restic backup ~/ && tailapps send backups/last \
  '{"ok":true,"size":"1.2 GB"}' --alert 'Backup done'

Servers

Uptime

Each device checks your sites itself, every 30 seconds. Red when one is down or slow.

Fetch, on each device

"sites": { "fetch": "https://tailstats.com/up",
           "raw": true, "every": 30 }

Mac & iPhone

Mac remote

Volume, speakers or AirPods and the display, from your phone. Try it above.

Send to the Mac’s copy

{ "send": { "volume": { "value": "$args.value" } } }

Agents

Agent check-ins

Claude Code pings your phone when a long task finishes or needs you, through a hook.

An agent hook

"Stop": [{ "hooks": [{ "type": "command",
  "command": "~/Applications/TailApps.app/Contents/
    MacOS/tailapps-hook claude-sessions/agent" }] }]

How data gets in

Three ways in. All of them work today.

Fetch

The app asks for data itself, on your Mac and on your iPhone, from any host you approve. On your Wi-Fi it can reach a sensor or an inverter by its local address.

"fetch": "http://192.168.1.40/api/now"

Push URL

Every app inbox can have a private HTTPS URL. ESP32s, Home Assistant, webhooks and CI post JSON to it. Choose “Deliver to all my devices” and it reaches your iPhone even while your Mac sleeps. Pushes from outside are protected by HTTPS, not end-to-end encryption.

curl $PUSH_URL -d '{"temp":22.4}'

The CLI

The tailapps command runs on macOS, Linux (Raspberry Pi too) and Windows. It signs in like a device, so what it sends is sealed end to end, and it can listen and run a command for each message.

tailapps send pi/health '{"cpu":48}'

Coming soon

Your phone’s sensors, on your cards.

Not here yet. These are the next things cards will be able to use on your iPhone.

  • Coming soon

    Location

    Share where your iPhone is and see it on a map on your Mac. Only when you turn it on.

  • Coming soon

    Camera and photos

    Snap a photo on your phone and drop it into an app on your Mac.

  • Coming soon

    QR and barcode scan

    Scan a code with your phone and send it to an app: stock, tickets, parcels.

  • Coming soon

    Widgets

    Any app’s card as a widget on your iPhone home screen and Mac desktop.

Your micro-apps, built by your agent.

Free during the beta. Start on your Mac, add your iPhone, and script it all from the terminal.

  • Mac
  • iPhone Beta
  • CLI
  • Windows Soon
  • Linux Soon
  • Android Soon

Then connect your agent:

claude mcp add tailapps -- /Applications/TailApps.app/Contents/MacOS/tailapps-mcp